gns3vault ccie lab1 basic setup and configs…

rene_ccie_lab1

the below zip contains all the device configs and topology.net…  the dlci’s for the routers have not been set up  but the interfaces are assigned properly to the frame switch, and the switches have only vlan 1… the aim of this is basic point to point connectivity between ip addresses where possible, and cdp, and to save set up time for me later for practice… the first thing you should do is verify always, but you knew that… have fun, or something…

configs

the routers are 3725’s, the switches are 3640’s with esw16-nm

for the tasks  go to http://gns3vault.com/CCIE/ccie-practice-lab-1.html

r1#sh ip int brie | i up
FastEthernet0/0            192.168.123.1   YES NVRAM  up                    up
FastEthernet0/1            192.168.157.1   YES manual up                    up
Serial1/0                  192.168.1.1     YES NVRAM  up                    down
Loopback0                  1.1.1.1         YES NVRAM  up                    up
Loopback1                  11.11.11.11     YES NVRAM  up                    up

r2#sh ip int brie | i up
FastEthernet0/0            192.168.123.2   YES NVRAM  up                    up
FastEthernet0/1            192.168.246.2   YES manual up                    up
Serial1/0                  unassigned      YES NVRAM  up                    down
Serial1/0.26               192.168.26.2    YES manual up                    down
Serial1/0.1247             192.168.1.2     YES manual up                    down
Loopback0                  2.2.2.2         YES NVRAM  up                    up
Loopback1                  22.22.22.22     YES NVRAM  up                    up
Loopback2                  172.16.0.1      YES NVRAM  up                    up
Loopback3                  172.16.1.1      YES NVRAM  up                    up
Loopback4                  172.16.2.1      YES NVRAM  up                    up
Loopback5                  172.16.3.1      YES NVRAM  up                    up

r3#sh ip int brie | i up
FastEthernet0/0            192.168.123.3   YES NVRAM  up                    up
Loopback0                  3.3.3.3         YES NVRAM  up                    up
Loopback1                  33.33.33.33     YES NVRAM  up                    up

r4#sh ip int brie | i up
FastEthernet0/0            192.168.246.4   YES NVRAM  up                    up
Serial1/0                  unassigned      YES NVRAM  up                    down
Serial1/0.46               192.168.46.4    YES manual up                    down
Serial1/0.1247             192.168.1.4     YES manual up                    down
Loopback0                  4.4.4.4         YES NVRAM  up                    up
Loopback1                  44.44.44.44     YES NVRAM  up                    up

r5#sh ip int brie | i up
FastEthernet0/0            192.168.157.5   YES NVRAM  up                    up
Loopback0                  5.5.5.5         YES NVRAM  up                    up
Loopback1                  55.55.55.55     YES NVRAM  up                    up

r6#sh ip int brie | i up
FastEthernet0/0            192.168.246.6   YES NVRAM  up                    up
Serial1/0                  unassigned      YES NVRAM  up                    down
Serial1/0.26               192.168.26.6    YES manual up                    down
Serial1/0.46               192.168.46.6    YES manual up                    down
Loopback0                  6.6.6.6         YES NVRAM  up                    up
Loopback1                  66.66.66.66     YES NVRAM  up                    up
Loopback2                  66.66.66.1      YES NVRAM  up                    up
Loopback3                  66.66.66.2      YES NVRAM  up                    up

r7#sh ip int brie | i up
FastEthernet0/0            192.168.157.7   YES NVRAM  up                    up
Serial1/0                  192.168.1.7     YES NVRAM  up                    down
Loopback0                  7.7.7.7         YES NVRAM  up                    up
Loopback1                  77.77.77.77     YES NVRAM  up                    up

sw1#sh int status | i connected
Fa1/1                      connected    1          a-full   a-100 10/100BaseTX
Fa1/2                      connected    1          a-full   a-100 10/100BaseTX
Fa1/5                      connected    1          a-full   a-100 10/100BaseTX
Fa1/6                      connected    1          a-full   a-100 10/100BaseTX
Fa1/12                     connected    1          a-full   a-100 10/100BaseTX
Fa1/13                     connected    1          a-full   a-100 10/100BaseTX
Fa1/14                     connected    1          a-full   a-100 10/100BaseTX
Fa1/15                     connected    1          a-full   a-100 10/100BaseTX

sw2#sh int status | i connected
Fa1/1                      connected    1            full     100 10/100BaseTX
Fa1/2                      connected    1            full     100 10/100BaseTX
Fa1/3                      connected    1            full     100 10/100BaseTX
Fa1/4                      connected    1            full     100 10/100BaseTX
Fa1/7                      connected    1            full     100 10/100BaseTX
Fa1/12                     connected    1            full     100 10/100BaseTX
Fa1/13                     connected    1            full     100 10/100BaseTX
Fa1/14                     connected    1            full     100 10/100BaseTX
Fa1/15                     connected    1            full     100 10/100BaseTX