3.5.b Implement and troubleshoot neighbor relationship

3.5.b [i] Multicast, unicast EIGRP peering

To create an EIGRP routing process, use the following commands from within global configuration mode:

Router( config)# router eigrp autonomous-system

Router( config-router)# network network-number

EIGRP sends updates to the interfaces in the specified networks. If you do not specify the network of an interface , the interface will not be advertised in any EIGRP update.

IPv6 equivalent of 224.0.0.10 (group address that is used to send routing information to all EIGRP routers on a network segment) is FF02:: A.

Adam, Paul (2014-07-12). All-in-One CCIE V5 Written Exam Guide (Kindle Locations 3054-3060).  . Kindle Edition.

http://www.cisco.com/c/en/us/td/docs/ios/12_2/ip/configuration/guide/fipr_c/1cfeigrp.html