3.1.b Identify implement and troubleshoot IPv6 addressing and subnetting

3.1.b [vii] SLAAC/DHCPv6 interaction

Stateless Address Autoconfiguration (SLAAC) is one of the most convenient methods to assign Internet addresses to IPv6 nodes. This method does not require any human intervention at all. If one wants to use IPv6 SLAAC on an IPv6 node, it is important that this IPv6 node is connected to a network with at least one IPv6 router connected. This router is configured by the network administrator and sends out Router Advertisement announcements onto the link. These announcements can allow the on-link connected IPv6 nodes to configure themselves with IPv6 address and routing parameters, as specified in RFC 2462, without further human intervention.

Adam, Paul (2014-07-12). All-in-One CCIE V5 Written Exam Guide (Kindle Locations 2387-2390).  . Kindle Edition.
https://tools.ietf.org/html/draft-ietf-v6ops-dhcpv6-slaac-problem-01